How To Use A Keg Pump In Tapping A Keg

Tapping a keg can be a fun activity to do with friends, and it’s even more enjoyable when you can do it properly using a keg pump. In this article, we’ll show you how to use a keg pump, and help you get the most out of your party.

  • Clean the inside of the keg. Make sure there are no pieces of metal or plastic that could end up clogging the pump.
  • Insert the flexible hose into the top of the keg and place the pump onto the hose. Make sure that the red valve is facing down into the keg.
  • Turn the pump on, and wait for it to start flowing. Once it does, start pumping according to the instructions on the pump’s label. If you run out of gas before finishing pumping, turn off the pump and restart it from scratch.
  • When you finish pumping, release the valve on top of the keg by depressing it with your hand. The beer will now flow out of the keg and into your cup or mug.

What is a Keg Pump?

A keg pump is a device used to transfer beer from a keg to a serving vessel such as a bottle or cup. Keg pumps come in two main varieties. manual and electric. Manual pumps operate with the help of your own arms and hands, while electric pumps are powered by an electrical cord.

Keg pumps can be a bit of a nuisance to use, as they require you to hold the keg at an angle and push down on the pump handle to dispense beer. Some keg pumps also have a built in spigot, which makes dispensing beer much easier.

How to use a Keg Pump

If you’re like most home brewers, you probably have a generator full of beer that needs to be tapped. But how do you do it? With a keg pump!
Here’s how to use one:

 Assess the situation. If you’re working with a standard Cornelius keg, unscrew the top and remove the ball lock fitting. If you’re using a CO2 tank or regulator system, skip this step.

 Find the right pump. There are many different types of pumps available, so find the one that best suits your needs. Some pumps are designed specifically for legging while others can be used for both conditioning and tapping; it just depends on the model. The two most common types of pumps are hand pumps and electric motors.)

Connect the pump to the keg. Most pumps come with an appropriate connector, but if not check the manufacturer’s website or look for a compatible part number. Be sure to tighten down all of the fittings securely before moving on to step 4.

 Fill up your keg. Put enough gas into the regulator or tank to fill the keg to the desired level. Be sure to read and follow the manufacturer’s instructions for filling your keg. (Most pumps come with a filling gauge to make this process easier.)
Attach the tap. There are a few different ways to do this, but the most common is to use an a raptor that attaches to the faucet. Once you’ve attached the tap, tighten it down firmly.
Start pumping. Now start pumping the pump until the beer comes out of the spout. Be patient it can take a while for the beer to flow through the pump.

Pros and Cons of using a Keg Pump

There are a few pros and cons of using a keg pump when tapping a keg. One pro is that it can be faster than using a hand pump. The con to this is that it can be more difficult if the line is coiled around the barrel, which can happen if the line is not secured properly. Another pro of using a keg pump is that you don’t have to worry about air bubbles in the beer. This can happen if you use a hand pump and there are air bubbles in the lines.

Overall, there are pros and cons to using every type of pump, so it really depends on what you’re more worried about speed or accuracy.


Tapping a keg is one of the most important steps in becoming a professional craft beer brewer. In this article, we will teach you how to use a keg pump and help you get started on your path to becoming a master brewer. By following our instructions, you will be able to safely and efficiently transfer beer from the keg to your serving tanks. It’s time to put those brewing skills into practice and start making some amazing craft beers.


Leave a Reply

Your email address will not be published. Required fields are marked *